Water care starter guide
The basic routine for keeping hot tub water safe, clear and comfortable: test, balance, sanitise, then look after the filter.
Before you start
This is a general routine. Your hot tub’s manual and the label on each product come first, and they can differ from what’s written here. Never mix chemicals, and read our chemical safety page.
1. Test the water
Test before you add anything, so you only add what the water needs. Dip a test strip, compare it with the chart and write down the results, so you can see changes over time.
2. Balance: alkalinity, then pH
Total alkalinity works as a buffer that keeps the pH steady. Vian gives 80 to 150mg/l (ppm) for total alkalinity and 7.2 to 7.6 for pH. Fix the alkalinity first, then the pH.
- Alkalinity below 80? Use an alkalinity increaser, dissolved in water first, as directed on the pack.
- pH below 7.2? Use a pH increaser. pH above 7.6? Use a pH reducer.
- We suggest adding one product at a time with the pumps running, letting it circulate, then retesting before adding another.
Need an alkalinity increaser, pH increaser or pH reducer? Ask us and we’ll help you get the right one.
3. Sanitise
A sanitiser keeps the water safe to use. Our shop has chlorine and bromine. Pick one system and keep to it, and ask us if you’re thinking of changing from one to the other. Our guides explain the differences: chlorine vs bromine, chlorine guide and bromine guide.
- Chlorine granules: Vian says to keep free chlorine at about 3mg/l (ppm), with the pH at 7.2 to 7.6.
- Bromine tablets: go in a bromine feeder, a floating dispenser or a tablet pod made to sit in the filter, such as a SpaPod. Never add them loose to the water or the filter. Test regularly and adjust, following the instructions on the pack and from the maker of your feeder or pod.
4. Shock
Vian’s non-chlorine shock goes in after bathing, weekly or fortnightly, depending on use.
5. Look after the filter
Darlly’s Sanistream user guide says to rinse the filter weekly and give it a deeper clean once a month, or more often if flow to the jets drops, and suggests a spare cartridge so you can swap while one dries. Weak jets? See hot tub pump problems. When a cartridge is worn or won’t come clean, replace it: use the filter finder. Our filter cleaning guide has more.
6. Cloudy, foamy or scaly water
If the water is cloudy, test the balance and sanitiser and check the filter first (see cloudy hot tub water). The same guide covers foam. Vian says its No Scale keeps the heater element from building scale.
Vian No Scale 1L
Need a spa clarifier or anti-foam? Ask us and we’ll help you choose one.
7. Cover care
Wipe the cover down and use a protectant made for vinyl, as the pack directs.
Something not right with your hot tub itself, such as it not heating or tripping the power? That’s a job for an engineer: see hot tub problems, hot tub not heating, tripping the electrics or black bits in hot tub water, or contact us.
Running a holiday let? See holiday-let hot tub care and our HSG282 guidance.










